
###
###
The PMA4000 is an audio panel that provides switching of two Coms and two Navs. It has a 4-place
mono IntelliVox
®
intercom, and can be configured for PTT intercom. Four unswitched inputs are available.
Includes a built-in speaker amplifier. Hear aircraft radio audio through the headsets or over the cabin speaker
by a press of a pushbutton.
The PMA4000 has PS Engineering’s revolutionary IntelliVox
®
intercom squelch protocol. A mode switch
allows the Pilot to select either ISO or ALL intercom modes.
Independent intercom volume controls for the Pilot and the Copilot. Because this system was designed with the tandem cockpit in mind, the Copilot
volume can be mounted in another location. The volume controls only the intercom, the radio volume is adjusted by the radio controls.
The PMA4000 provides a monaural entertainment input. With our SoftMute
™
, the music mutes, allowing undistracted communications.
ORDERING INFORMATION PART NO.
PMA4000 4-Place Intercom ..........................................................................................11942
Audio panel with 4-place intercom with Isolate and ALL modes, single music input, FAA-TSO
Weight: 15 ounces Dimensions: 1.70” H X 2.43” W X 6.50” D
2¼” round mounting plate ...............................................................................575-004-0001
Allows installation in a standard 2¼-inch instrument hole.
Warranty: 1-Year Pro Support Exchange Program, when installed by an authorized PS
Engineering Dealer
Shown actual size
4
|
PMA4000/PMA6000B
TECHNICAL SPECIFICATIONS
Approval Basis FAA-TSO C50c (11942)
Input power 12-28 Volts Current Drain: < 250 mA
Headphone Impedance 150-1000 Typical
Audio Distortion <1% THD @ 38 mW into 150
Speaker Output 3 Watts @ 14 Vdc 10 Watts @ 28 Vdc
Aircraft Radio Impedance 510
±3 dB Music Freq. Response 200 Hz-18 Khz
PMA4000
PMA6000B
The PMA6000B has been given the benefit of PS Engineering’s years of
audio panel control design and manufacturing experience. It offers a low cost
alternative to the more capable audio panel product line that the industry has
come to expect from such a focused and driven company.
This audio selector panel has our original “Set it and Forget it” manually
adjusted VOX intercom and a slew of features to enhance versatility and utility.
Swap function allows selection of Com 1 or Com 2 from remote pushbutton.
Fail-safe feature automatically hard-wires the Pilot to Com 1 in the case of an
outage Uses a single 44-pin connector making installation easier.
The PMA6000B holds FAA TSO and EASA ETSO and was designed to be made
easier to install using a single 44-pin Sub-d connector.
TECHNICAL SPECIFICATIONS
Approval Basis FAA-TSO C50c, C35d
EASA ETSO C50c, C35d
Certification Documents RTCA DO-160B, DO-178B, DO-143
Intercom 4-place Mono
Transceivers 2 (Com 1, Com 2)
Receiver Inputs 6 (Nav 1, Nav 2, ADF, DME, AUX, MKR)
Marker Beacon Internal (optional)
Unswitched inputs 2
Power Required 11-33 VDC, 1.5 A
Power consumption Speaker ON: 600mA OFF: 350 mA
Output power Speaker: 3 W into 4Ω
Headphone: 50 mW into 150Ω, <1% THD
Audio Frequency Response ±3dB, 350Hz-6,000Hz
Entertainment Frequency Response ±3dB, 200Hz-15,000 Hz
Weight 0.8 lb.
Dimensions 6.25” W x 1.3” H x 7.15”
Environmental Conditions DO-160B
A1D1/CAMXXXXXXBBBBAAX
Temperature Range -20 C to +55 , with brief
operation at +70 C
Altitude 50,000 feet, unpressurized
Marker Receiver 75 MHz crystal controlled with external
marker lights and MM sense output
ORDERING INFORMATION PART NO.
PMA6000B Audio Selector w/ 4-place intercom and Marker Beacon ........050-604-0300
PMA6000B No Marker Beacon .........................................................................050-604-0100
Warranty: 1-Year Pro Support Exchange Program, when installed by an authorized PS
Engineering Dealer
The PMA7000B audio panel lends itself nicely for upgrading an existing Bendix/
King KMA24. While not a plug and play with this KMA24, the PMA7000 series
uses the KMA24 connector exactly as it is. This means that none of the wires to
the radios are changed. Because the KMA24 does not have a built-in intercom,
a second connector is necessary to access the capabilities of intercom, music
inputs, and even a telephone interface.
With our legendary 6-place IntelliVox
®
auto squelch, adjusting the trip level
of the individual microphones is a thing of the past. IntelliVox
®
is designed to
keep all microphones off until it recognizes a voice. When is does hear a voice,
it instantaneously opens up that mic channel, allowing the intercom channel to
be heard. No more clipping or missed syllables, it just works flawlessly.
The PMA7000 series has 3-Com capability. If desired, the Com 3 can be wired
as a full duplex telephone interface. With the ability to call ATC while on the
ground using the headset, the clarity of these calls are much improved, making
the phone a virtual 3rd radio.
Stereo music is the hallmark of the PMA7000 series. With audiophile quality,
the Pilot, crew, and passengers can listen to music using our Softmute
™
.
When the radio becomes active, the music will mute, allowing unfettered
access to the radio communications. There is the ability to place the music into
“Karaoke”mode through the use of the ICS button.
The capability of connection to Bluetooth
®
enabled devices is now available
with the PMA7000BT audio panel. Make phone calls or stream hi-fi stereo
music into the audio system wirelessly. All PMA7000 series audio panels,
including the original PMA7000MS can be upgraded with the PMA7000BT Plug
‘N Play audio panel.
CHECKLIST OF FEATURES:
n
IntelliVox
®
automatic VOX system with individually gated microphones
n
6-Place hi-fi stereo intercom with Soft Mute
™
n
Two music mute modes: Mute On and Mute Off
n
Built-in Marker Beacon Receiver
n
Cellular telephone input with dedicated On/Off hook switches for
unprecedented flexibility
n
Split mode for dual audio panel capability
n
Two hi-fidelity stereo music source inputs
n
Three Isolation modes - Pilot Isolate, All, and Crew
n
Four unswitched inputs
n
Selectable music muting for passengers
n
Selectable special intercom mode with “Alternate Intercom Mode”
n
RAM (Radio Active Mute) eliminates constant back ground noise
from unswitched inputs
TECHNICAL SPECIFICATIONS
Approval Basis FAA-TSO C35d, C50c
EASA ETSO C50c, C35d
Certification Documents RTCA DO-160C, DO-178B,
DO-143, DO-214
Intercom 6-place Stereo
Transceivers 3 - Com 1, Com 2, Com 3
(or Tel Duplex)
Receiver Inputs 5 - Nav 1, Nav 2, ADF, AUX, DME
Marker Beacon Internal
Unswitched inputs 4
Power Required 11-33 VDC, 1.5 A
Power consumption Speaker on, 600mA typical.
1A peak
Speaker off, 350 mA
Output power
Speaker: 3 W into 4W (14V) 10W into 4W (28V)
Headphone: 50 mW into 150Ω w/o clipping
38 mW into 150Ω, <1% distortion
Audio Frequency Response ±3dB, 300Hz-6,000Hz
Entertainment Frequency Response ±3dB, 20Hz-18,000 Hz
Weight 1.5 lb.
Dimensions 6.25” W x 1.3” H x 6.8” deep behind
instrument panel
Environmental Conditions DO-160C
A1D1/CA(MN)XXXXXXBBBBTBKXX
Temperature Range -15 C to +55 , with brief operation at
+70 C
Altitude 50,000 feet, unpressurized
Marker Receiver 75 MHz crystal controlled receiver
External Marker Lights and MM sense output
ORDERING INFORMATION PART NO.
PMA7000B Audio Selector with 6-place intercom and Marker Beacon .....050-781-0203
PMA7000B No Marker Beacon .........................................................................050-781-0103
PMA7000BT Audio Selector with Bluetooth
®
and Marker Beacon .............050-781-0204
WARRANTY
2-year exchange program, when installed by an authorized PS Engineering Dealer. After the warranty expires, a
fixed repair fee will cover any repair. See Warranty Information in Installation manual for full details.
PMA7000B / PMA7000BT
|
5
PMA7000B
PMA7000BT
Commentaires sur ces manuels