Ps-engineering PAR200 Manuel d'utilisateur télécharger pdf (Page 29)

PS Engineering Inc. ®

PAR200 Audio Selector Panel, COM radio Controller and Intercom System

Installation and Operator’s Manual

200-228-0000 Page 3-5 Rev. 4, Dec. 2013

Bandwidth (kHz) Frequency Displayed

25 118.10000 118.100

8.33 118.10000 118.105

This format is continued through to 136.990



8.33 136.99166 136.990

3.6.3 Radio Volume (7)

Push and hold the small frequency-select knob for one second, until the display changes to the menu.

Turn the large knob to adjust the aircraft radio volume.

You can push the knob again to return to the frequency display, or the display will revert automatically

after five seconds without any activity.

3.6.4 Radio Squelch

To defeat the automatic radio squelch, push and hold the frequency knob until the display changes to

ASQ OFF, which defeats the squelch and you will hear any weak signals.

Press the right hand side rotary selector knob again until you get the ASQ ON, to restore the Automatic

Squelch.

Figure 3-3 Radio Squelch on/off

3.6.5 Cockpit Speaker

When the cockpit speaker is turned on, any receiver audio selected will be heard in the speaker. Any

unswitched audio will always be present in the cockpit speaker regardless of the speaker on/off selection.

To activate the cockpit speaker, push and hold the frequency knob until the display changes. Push the

small momentarily to move the cursor under the SPR OFF display. Turn the larger knob clockwise unto

the SPR is ON.

Push/hold for >1

sec.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 42 43

Pas de commentaire

Ps-engineering PAR200 Manuel d'utilisateur Page 29